-
Cooling Fan - Working Principle of AC & DC Fan
Jul 22 , 2021
Working principle of AC fan: The difference between AC axial fan and DC axial fan is that the former power supply is AC, the power supply voltage is negatively altered, the fan power supply voltage is fixed, and the circuit control must be rely on circuit control, so that the two sets of coils will work to produce different magnetic fields. AC cooling fan is fixed due to the power supply frequency...
Read More
-
What is the main reason for the imbalance of the impeller
Jul 27 , 2021
During the use of the impeller of AC & DC cooling fans, the causes of imbalance can be briefly divided into two types: wear of the impeller and fouling of the impeller. These two situations are related to the dust removal device connected in front of the induced draft fan. The dry dust removal device causes the impeller imbalance mainly due to wear; while the wet dust removal device affects th...
Read More
-
How to Determine the Quality of the Cooling Fan
Aug 11 , 2021
Cooling Fans mainly include axial flow fans and centrifugal fans, and axial fans are divided into DC axial fans and AC axial fans. With the increasing use of cooling fans, more and more fans appear on the market. However, the quality of these fans varies from good to bad. If you want to buy a good fan, you must know how to distinguish the fake and inferior of the fan. So how to judge the fake and ...
Read More
-
Blower - The Characteristics of Centrifugal Fans
Aug 19 , 2021
The centrifugal fan is mainly composed of an impeller and a casing, and the impeller of a small centrifugal fan is directly mounted on the motor. Centrifugal fans are generally single-sided air intake and use single-stage impellers. The impeller is the main component of the centrifugal fan. Its geometry, size, number of blades and manufacturing accuracy have a great influence on performance. The i...
Read More
-
Cooling Fan - What are the relevant parameters
Aug 25 , 2021
Airflow The airflow of cooling fan refers to the total airflow of air discharged or absorbed by the cooling fan per minute. If calculated in cubic meters, it's the CMM. The airflow unit often used by cooling fans is CFM (about 0.028 m3 / min). Large air volume fan, airflow is the most important index to measure the cooling capacity of cooling fans. Obviously, the larger the airflow, the highe...
Read More
-
What should be considered when choosing a DC fan？
Sep 01 , 2021
As we all know, DC fans are the key cooling equipment for modern industrial machinery. It consists of stator, rotor and commutator. The basic structure is generally composed of a motor, bearings, blades, housing, power plugs and wires. According to different power supply methods, there are two types of motors: DC motors and AC motors. So do you know what to consider when choosing a DC fan? Speed o...
Read More
-
Why the blades of an axial fan are odd and not even？
Sep 08 , 2021
First of all, many people find that the structure of the cooling axial fan blades is composed of odd numbers such as 3, 5, 7, 9 and 11. However, many consumers are not very familiar with it, and are curious, whether this is just a design coincidence or another mystery Where? As we all know, the actual heat dissipation effect of a cooling fan largely depends on the design of the blade pitch and the...
Read More
-
Components of the Cooling Fan
Sep 16 , 2021
Cooling fans have a wide range of applications, and there are many types of relative cooling fans, such as axial cooling fans, centrifugal cooling fans, and cross flow cooling fans. But its composition and structure are similar. For example, an axial fan is mainly composed of four parts: the rotor, the stator, the motor, and the outer frame. 1. Rotor part: The rotor part of the cooling fan is comp...
Read More
